WPS connection:

  • Step 1:Link the HDMI port of your television to the DirecTV receiver using an HDMI cable to enable WPS button on direct tv router.
  • Step 2:Connect the power adapter to the DirecTV receiver and plug the cord to the wall socket.
  • Step 3:Keep a note of the router network SSID and the password.
  • Step 4:Turn on the Wi-Fi router, CCK, and DirecTV receiver.
  • Step 5:If the router has a WPS button, it can be used to connect to any device having the Wi-Fi Protected System. 
  • Step 6:Now, turn on the router and press the WPS button for a few seconds until the WPS LED flashes.
  • Step 7:To enable WPS button on direct tv router Cinema Connection Kit device, press and hold the WPS button on CCK within two minutes (after pressing the WPS button on the router). Check if the green LED is flashing.
  • Step 8:After the connection is set up, go on to connect the CCK device to the DirecTV receiver. 
  • Step 9:The solid green WLAN LED on the CCK device indicates the established connection. In case the green light does not appear, then reconnect the CCK device.
  • Step 10:Switch on the television and proceed with the on-screen instructions.
  • Step 11:To configure the settings later, select Set UP Later if you want to confirm the Wi-Fi connection, press the Info button on the remote.
  • Step 12:The System Info & Test screen appears on the TV screen, choose the Network Setup menu from the left side.
  • Step 13:Then, go on to select Set Up Now or Network Setup from the options.
  • Step 14:Next using WPS button on direct tv router, select Connect Now to connect the television to the network