The old router need not be dumped into the basement; instead, you can convert it to a Wi-Fi repeater to enhance the Wi-Fi network in and around the building. Just a few simple connections to turn old router into a wi-fi repeater happen.

Old router:

  • Step 1:Plug the power cable and power up the router.
  • Step 2:Perform a reset operation by pressing the reset button on it. Else, log in to its web setup page and reset it
  • Step 3:By this steps to turn old router into a wi-fi repeater, the previous router settings are changed to the default factory settings.

New router:

  • Step 1:Connect an internet cable to the WAN port of the router.
  • Step 2:Get an Ethernet cable and connect it to the LAN port of the router.

Old router:

  • Step 1:Use the other end of Ethernet cable from the new router to connect to the LAN port of the old router.
  • Step 2:Take another Ethernet cable to connect the LAN port of router & computer.


  • Step 1:Find the old router’s IP address on the label attached to it. If you cannot find the IP address on the label, follow the next step to turn old router into a wi-fi repeater.
  • Step 2:Launch the Command Prompt window, input “ipconfig,” and press Enter key.
  • Step 3:Find the Default Gateway under Ethernet adapter and then note down the old router’s IP address.
  • Step 4:Next, open the web browser and enter the old router’s IP address to open the router page.
  • Step 5:The router page prompts for the login credentials; enter the Username and Password to log in to the old router’s settings page.
  • Step 6:Mostly, the default Username and Password of the router is “admin,” but if you have changed it, then use the new credentials.
  • Step 7:Under the Network settings, disable the DHCP Server in the DHCP server settings.
  • Step 8:Save the settings and then change the router IP Address from to
  • Step 9:Make sure that no device is using the address. If it is, then change the IP address.
  • Step 10:Save the configuration settings, and the router page starts to refresh and changes to a new IP address.
  • Step 11:Once again, log in to the router page with the credentials.
  • Step 12:Open the Wireless menu, change the Network name(SSID) to the new router’s SSID, and save the settings.
  • Step 13:Change the Network password also to the new router’s password.
  • Step 14:Now, place your old router in an appropriate location to extend the Wi-Fi network from the new router to turn old router into a wi-fi repeater.