How To Troubleshoot Router Wps Button Flashing Red?

W-Fi Protected Setup (WPS) is a special feature in routers. It allows you to connect to a wireless network from your computer or other devices without the need to enter the network password. WPS automatically sends the network key to the connecting device, and the device will remember it for future use. If your router WPS button flashing red, it might be due to a connection cutoff or a session overlap. To fix the issue, follow the steps given below.

Using the physical WPS button:

  • Step 1:First, locate your WPS on the router, which will be available at the router’s backside.
  • Step 2:Press the WPS button and hold it for a few seconds to enable it.
  • Step 3:Navigate to your computer or smartphone and turn on Wi-Fi. Select your wireless network name to connect.
  • Step 4:Once your device is connected to the wireless network automatically, check if you can access the Internet.
  • Step 5:Check if the WPS button turns solid green.
  • Step 6:If the WPS button flashes red, try enabling the WPS button from the router’s settings page.

Steps to enable WPS on the router’s settings page:

  • Step 1:First, connect your router and computer using a standard Ethernet cable.
  • Step 2:On your computer, open the default browser.
  • Step 3:Enter your router’s IP address in the URL field and press Enter to access your router’s login portal.
  • Step 4:Enter your login credentials to access the router’s settings page.
  • Step 5:Navigate to the Wireless Setup menu and click the WPS tab from the left-side panel.
  • Step 6:On the right-side pane, enable WPS and click the Save button to save your changes.
  • Step 7:Now, connect your device to the wireless network. Once connected, check if the router WPS button flashing red.