How To Use Mac Filtering On Router

To know how to use MAC filtering on router, refer to the simple steps provided below. MAC filtering will help you to provide access only to the specific wireless devices that have been added to the list to access the wireless router.

Netgear router:

The procedure to enable MAC filtering in a wireless Netgear router is given below.

  • Step 1 :Use an Ethernet cable to establish a connection between the Ethernet port of your computer and the LAN port of the Netgear router.
  • Step 2 :Go to the computer, navigate to the address field of the default web browser, and enter the Netgear router’s IP address.
  • Step 3 :When you see a prompt window, provide the correct credentials in the Username and Password fields and click the Login option.
  • Step 4 :Now, you can access the web-based setup page of the Netgear router from the web browser.
  • Step 5 :Select the Advanced option followed by the Wireless Settings option on the left-hand side of the screen.
  • Step 6 :Click the Setup Access List option on the main panel and proceed with how to use Mac filtering on router guide.
  • Step 7 :Click the Add button, fill the Device Name and MAC Address fields, and select the Add option.
  • Step 8 :Repeat the previous step to add other wireless clients to this list.
  • Step 9 :Once done, select the checkbox next to the Turn Access Control On option and click the Apply option in the Wireless Card Access List window.
  • Step 10 :Now, only the wireless devices added to the MAC filtering list can access the Netgear router’s network.

TP-Link router:

  • Step 1 :Launch a web browser on your computer that is connected to the TP-Link router.
  • Step 2 :Visit the TP-Link router’s login page by entering the IP address in the address bar.
  • Step 3 :After filling the User Name and Password field, click the OK option.
  • Step 4 :Select the IP & MAC Binding option, followed by the ARP List option.
  • Step 5 :Now, you can see the MAC address of the wireless devices that are connected to the TP_link router.
  • Step 6 :Navigate to the Wireless tab, select the Wireless MAC Filtering option, and click the Add New button.
  • Step 7 :Fill the MAC Address and Description field, choose the Enabled option from the Status drop-down menu, and click the Save option.
  • Step 8 :At finally on using how to use Mac filtering on router guide, Click the Enable option on the Wireless MAC Filtering page.