How To Setup Static Ip On Router?

Setup static IP on router address is nothing but an IP address that is assigned to your computer or laptop. It is static because the number does not change, whereas the dynamic IP is the direct opposite of Static IP, which changes its IP number. The static IP is of great use when you access a website from your home router, and you can forward the ports to several devices that have a wireless connection to your computer. Once the router has an IP number in its memory, it doesn’t bound to change, and it’s accessible to forward some inbound requests directly to the computer.

  • Step 1:The setup has a few steps that should be followed to set up a Static IP on your router.
  • Step 2:Unplug the modem from your computer.
  • Step 3:Take a LAN cable and make a connection to your computer and the router.
  • Step 4:Turning on the modem and waiting for some time will make a stable connection to your router.
  • Step 5:On doing so, next open up your web browser.
  • Step 6:Make sure you always have wireless security turned on so that no one else will be able to access your connection.
  • Step 7:In the web browser window, log in to your router setup by entering the following IP address and click enter.
  • Step 8:This will open up your router portal, which will show you your login screen when you need to key in the Username and Password.
  • Step 9:The Username will be ADMIN and the password must be left blank. Click OK.
  • Step 10:This will show you two Internet connection types, one is the Static IP, and the other one is the Dynamic IP.
  • Step 11:At the time of installation, you will be provided with a Primary and a Secondary DNS server address, a subnet mask, and the IP address.
  • Step 12:Once you key in the information, click NEXT.
  • Step 13:This will take you to the next window and ask you to select wired or a wireless connection.
  • Step 14:Click the Wireless connection and set up your network security password; this will not be accessed by anyone except you.

How To Find Static Ip Address On Router

  • Step 1:Finding your static IP address on your windows is quite simple.
  • Step 2:Select the Start option and browse for the Run command. This is opened with the shortcut Windows key + R, either of these two will open up the Run command.
  • Step 3:Type ‘cmd’ and click OK.
  • Step 4:This will open up a command prompt with a black screen. Type in ipconfig where the cursor blinks.
  • Step 5:This will open up your windows IP configuration, which will display the connections made in the DNS.
  • Step 6:This will display your IP address, the Subnet mask, and the Default Gateway after you setup static IP on router.
  • Step 7:The default gateway is the static IP address.

Method :

  • Step 1:Open your web browser and in the search bar just type MY IP Address, click Enter.
  • Step 2:On doing this, the web page will open, displaying the IP address result as in command prompt method mentioned above.

How To Configure Static Ip In Router Tp-Link

To configure Static IP in TP-Link, follow these steps.

  • Step 1:Make sure the connection is secure.
  • Step 2:Connect the modem to the router using an Ethernet cable.
  • Step 3:Make a proper connection from the computer to any of the LAN ports of the router.
  • Step 4:Turn on your computer but not your modem until you login to your router setup.
  • Step 5:After logging in to your router, open up the web page and go to TP Link's wireless setup.
  • Step 6:Choose Quick Setup, which will show you the region and the timezone. Click Next.
  • Step 7:This will display the WAN connection type, under which you can see Dynamic IP, Static IP, PPPoE, L2TP, and PPTP.
  • Step 8:Since we are dealing with the static IP, choose that and click next.
  • Step 9:This will display a dialog box asking for your IP Address, the subnet mask, the default gateway, and the Primary and Secondary DNS. All these will be provided by the Internet Service Provider (ISP).
  • Step 10:This information will also be available under the command prompt, ipconfig and Enter.
  • Step 11:Enter your Network Name (SSID) and the Password and keep the wireless connection ON.
  • Step 12:Click Next and the connection will be successful with the static IP.
  • Step 13:This will then show you the preview of the information entered before, like the Network name, WAN type, Password, and others. Click Save.
  • Step 14:You can test your connection. Once the setup static IP on router is successful, it will display the message ‘Success.’
  • Step 15:Click Finish.

Netgear Router Static Ip Setup

  • Step 1:Unplug the cable from the computer and plug it to the router’s WAN port.
  • Step 2:Take the LAN cable and connect it to the router and the computer.
  • Step 3:Shut down your computer and restart.
  • Step 4:Close the DSL modem and turn it on again. Wait until the router is powered up.
  • Step 5:Open the web browser, enter the following address for the Netgear router, and click Enter.
  • Step 6:Select the type of IP address, which can be static or dynamic.
  • Step 7:Since we are dealing with Static IP, select the same and enter the details asked like the IP Address, Subnet Mask, and the Gateway IP address.
  • Step 8:Enter the primary and the secondary DNS server addresses. and Click ‘Wireless Settings’ to open up the security settings in the next window.
  • Step 9:This opens up the Wireless network options.
  • Step 10:Enter the appropriate Name, region and mode. Select WEP as the Security option.
  • Step 11:Under the authentication type, there are Automatic, Open system and Shared key.
  • Step 12:Opt for Automatic and click on APPLY.
  • Step 13:Setup static IP on router settings process are now saved.