How To Convert Adsl Router To Dsl?

The Asymmetric Digital Subscriber Line (ADSL) is a type of DSL where the speed of the receiving and sending data is different. In most cases, the upstream data speed is higher than the downstream. It uses a special micro-filter to maintain the telephone service and the data streaming service at the same time. Carry out these below-mentioned steps how to convert ADSL router to DSL.

You can use the ADSL router on a DSL mode with the following steps.

  • Step 1:Take the telephone cable line and connect it to the DSL port of the router.
  • Step 2:Use an Ethernet cable to connect your computer and the router’s LAN port.
  • Step 3:Connect the router to power supply and turn it on.
  • Step 4:See that the router is turned on by checking the power light of the router.
  • Step 5:After that, open a web browser window on the computer and enter the router’s IP address in the address bar and press Enter.
  • Step 6:When the router’s login page opens up, enter the valid username and password to access the router setup page.
  • Step 7:On the router setup page, check the connection status and then navigate to the Advanced settings menu.
  • Step 8:Next, select the DSL mode as the connection mode and click Apply to save the settings.
  • Step 9:Refresh the page to change the router settings and go to WAN connection.
  • Step 10:Change the WAN connection to the ATM interface option and then add a new setting to the router.
  • Step 11:Enter the necessary information under the new setting and also enter the ISP details.
  • Step 12:Do not forget to save the settings.
  • Step 13:Following that, return to the WAN connection menu and choose the newly created setting for the service.
  • Step 14:Next, select the suitable WAN service type and click the Next button to configure the chosen service type.
  • Step 15:By using these steps we can execute that how to convert ADSL router to DSL.