How To Connect Swann Dvr To Router

The step-by-step how to connect swann DVR to router instructions to connect the Swann DVR device to your wireless router are provided below.

Step 1

  • Step 1 :First, the computer must have a stable internet connection.
  • Step 2 :Take an Ethernet cable and connect it between the LAN port of the Swann DVR device and the wireless router.

Step 2

  • Step 1 :On the Swann DVR device, press the Menu button and select the Network & Internet option.
  • Step 2 :Choose the DHCP option from the Network Type drop-down menu.
  • Step 3 :Now on using how to connect swann DVR to router guideance, the DVR will detect your network settings of the wireless router.
  • Step 4 :You will see the IP address, subnet mask, and default gateway information.
  • Step 5 :Note down the IP address for later use.
  • Step 6 :Go back to Menu and select the Service Point.
  • Step 7 :This will show the web service port. By default, it is set to 80.

Step 3

  • Step 1 :Move to the computer that is connected to the same wireless network.
  • Step 2 :Open a web browser, navigate to the address field, and enter the IP address that you have noted from the Swann DVR device.
  • Step 3 :This will be directed to the web-based management page of the wireless router.

Step 4

  • 1.Port forwarding:
  • 2.Linksys router:
  • Step 1 :Click the Applications Gaming tab and select the Port Range Forward option on the left panel.
  • Step 2 :On following how to connect swann DVR to router steps, When you see the Port Range web page, type Swann DVR in the Application field.
  • Step 3 :Fill the Start and End fields and choose the Both option from the Protocol drop-down menu.
  • Step 4 :Once you fill the correct IP address in the IP Address field, select the checkbox beside the Enable option.

D-Link router:

  • Step 1 :On the D-Link router’s web page, click the Advanced tab at the top and select the Virtual Server option on the left panel.
  • Step 2 :Fill the Rule Name, Private IP, Port Start, Port End, and Port Map fields with valid details.
  • Step 3 :Choose the TCP option from the Protocol menu and save the settings.

Step 5

  • Step 1 :Find the internet IP address that is useful for remote login.
  • Step 2 :The internet IP address is different from the IP address that is found in the Default Gateway field.
  • Step 3 :Go back to the web browser, type the internet IP address in the URL bar, and press Enter on the keyboard.
  • Step 4 :Carry out the how to connect swann DVR to router instructions that prompt on the screen to download and log in to the Swann DVR.