HOW TO CONFIGURE STATIC IP IN ROUTER FOR Dvr

A DVR is assigned an IP address by the router when you connect it to a network. So how to configure static IP in router for DVR, the IP address will change each time you unplug and plug the DVR if Dynamic Host Configuration Protocol (DHCP) is enabled on the router. This can be avoided by assigning a static IP to the DVR so that the router reserves that particular IP address to that DVR. The same must be configured in the router as well.

The instructions below will help you configure static IP in the router for a DVR.

Set up static IP in DVR:

Before configuring the static IP in the router, first, make a note of the IP and MAC address of the DVR, or you can set the static IP you wish to assign the DVR manually.

The steps are as follows.

Step 1:Open the Setup menu of your DVR and click the Network Setup option.

Step 2:In the Network Setup page, if DHCP is already enabled, then disable by unchecking it.

Step 3:Enter the desired IP address in the IP address field and also enter the Gateway and Subnet Mask details.

Step 4:Click the Apply button.

Step 5:Select the Network status tab and note down the IP and the MAC addresses of the DVR and proceed with how to configure static IP in router for DVR procedure.

Note: Refer your DVR’s user’s manual for the network options and settings.

Now the remaining configuration steps have to be done for the router.

Set up static IP in the router

Step 1:Open the web browser on your computer and enter the IP address of your router.
Step 2:Log in to the router’s web interface with the default username and password.
Step 3:Select the DHCP tab on the router’s web interface. This option will differ according to your router model. So refer your router’s user’s manual to set up the static DHCP.
Step 4:Enable static DHCP. Enter the name of your DVR.
Step 5:Now, enter the IP address and the MAC address of the DVR that you have noted down into the corresponding fields.
Step 6:Finally, click on the Add or Apply button.

This how to configure static IP in router for DVR guidelines will configure a static IP to DVR.