Ethernet Ports Not Working On Router - [SOLVED]

If you have a working wireless connection, but if the Ethernet is not working, then you will have to ensure to turn off the Wi-Fi. If your Windows computer has access to both the Wireless and the Wired connection, the best priority is for the Ethernet connection. Make sure to click the Wireless icon present in the notification bar on the desktop screen, select the Wi-Fi option ad click the slider to toggle off the Wireless connection.See if this resolves the Ethernet port issue. If you have the Wi-Fi disabled and still not able to connect to the network, there are some ethernet ports not working on router troubleshooting steps you must follow.

Method 1: Check If Ethernet Is Enabled

You can easily enable the Ethernet option from the Device Manager window.

  • Step 1:Press the shortcut keys (Windows + R).
  • Step 2:The Run command window will open.
  • Step 3:Type devmgmt.msc in the Run command field and press the Enter button.
  • Step 4:The Device Manager window will now open.
  • Step 5:Scroll down to the Network Adapters option, perform a right-click on the Network connection, and then click Enable from the list.
  • Step 6:Once finished, you can check to see if the Ethernet port is working or not.

Method 2: Reboot The Router

  • Step 1:Remove the router plug from your router and wait for a couple of minutes.
  • Step 2:Now, insert the router plug back into the power source and router, and then turn it on.
  • Step 3:Wait until all the LEDs on the router are lit up.
  • Step 4:Now, connect the Ethernet cable to the router and to the computer. And, you will be relieved from the ethernet ports not working on router error.

Method 3: Reset And Update Firmware

  • Step 1:Take out a safety pin, flip your router.
  • Step 2:Insert the pin into the reset hole and hold it for at least 2-5 seconds before releasing it.
  • Step 3:The router will be reset to factory defaults.
  • Step 4:Again, connect the router to your computer and access the router configuration page.
  • Step 5:Click the Advanced tab and select the Router Update option and click Check.
  • Step 6:If you find there is a new firmware available, click the Yes button to upgrade.

Method 4: Update Driver

  • Step 1:Open the Run command (Windows key + R).
  • Step 2:Type devmgmt.msc in the Run command, press the Enter button.
  • Step 3:The Device Manager window will open.
  • Step 4:Locate and expand the Disk Drive option from the Device Manager.
  • Step 5:Right-click on the outdated driver and select the option Update Driver and check ethernet ports not working on router issue is fixed.