Continue reading to know how to connect Smart TV to wireless router, refer to the easy guidelines mentioned below.

Step 1 - Turn on your Smart TV

  • Step 1: Press the Power button on the TV remote control to turn on the Samsung Smart TV.
  • Step 2: Alternatively, press the ON button on the TV.

Step 2 - Accessing menu

  • Step 1:Press any one of the following buttons on the TV remotecontrol, Menu, Home, SmartHub
  • Step 2:Use the navigation buttons to select the General option followed by the Network option.
  • Step 3:Choose the Open Network Settings or Network Setup option.
  • Step 4:This will open the Network Type screen.
  • Step 5:Once youselect the Wireless option, you will see available network connections on the TV screen.
  • Step 6:Follow these steps to connect smart tv to wireless router.

Step 3

Procedure 1 - Wireless connection

  • Step 1:Choose the SSID of your wireless router and then type the network key in the Enter the Password field using the navigation buttons on the TV remote.
  • Step 2:Select the Done option and check if the ‘Success Your TV is connected to the internet’ message appearson the screen.
  • Step 3:If so, select the OK option to exit the wizard.
  • Step 4:If the wireless network connection is not successful, place the wireless router closer to the Samsung Smart TV and update the firmware with the help of thefollowing steps.
  • Step 5:Download the most recent version of the TV’s firmware to a USB drive.
  • Step 6:Plug the USB drive into the TV.
  • Step 7:Press the Home button and then select Support -> Software Update -> Update Now.
  • Step 8:Choose the USB option and proceed with the instructions to complete the firmware update process.

Procedure 2 - Wired connection

  • Step 1:To access the fastest internet connection, you have to establish a wired connection between the TV and router.
  • Step 2:Connect an Ethernet cable between the rear port of the Samsung Smart TV and the LAN port of the wireless router.
  • Step 3:Select Network -> Network Settings -> Network Type -> Wired -> Connecton the TV.
  • Step 4:Verify whether the TV is connected to the internet.

If you need a remote assistance to connect smart tv to wireless router. Click the call button available on the screen.