How To Do Cable Modem To Wireless Router Setup?

Cable modem to wireless router setup is very simple if you follow the quick steps given on this page. To set up the cable modem with your router, you need a coaxial cable, two Ethernet cables, and the modem and router's power cords.

Detailed Instructions To Set Up Your Cable Modem With Your Router

  • Step 1:First, connect the coaxial cable to the wall outlet to get the Internet.
  • Step 2:If you have a DSL modem, you have to connect the telephone line cord to the wall port.
  • Step 3:Once you have connected the coaxial cable to the wall outlet, plug the other end into your modem's rear port.
  • Step 4:Once connected, you will receive the Internet through a modem.
  • Step 5:Connect the modem's power cord to an electrical outlet and turn it on.
  • Step 6:Take an Ethernet cable and plug one end of it into the Ethernet port of your modem.
  • Step 7:Next, connect the other end to the router's WAN port.
  • Step 8:Verify whether you have properly connected the Ethernet and coaxial cables to the devices.
  • Step 9:Now, connect the router's power cord to an electrical outlet and power it on.
  • Step 10:Wait until the router's power LED turns solid green or white.
  • Step 11:Check if it is receiving the Internet signals by looking at the Internet LED on the router.
  • Step 12:Once verified, connect your computer or mobile to the wireless router using the WPS configuration or cable setup using the second Ethernet cable.
  • Step 13:Access the router's administrative interface by entering the router's IP address in the browser's address bar.
  • Step 14:Enter the router's login credentials.
  • Step 15:If you have not changed the default credentials, enter them in the required fields and click the Sign In button.
  • Step 16:Configure the wireless settings and change the encryption key (if necessary).
  • Step 17:Finally, click the Save button to save the configured settings. Now your Cable modem to wireless router setup is completed.